EasyManua.ls Logo

Logik LID60W20

Logik LID60W20
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INSTALLATION
10
U-shaped drain hose
holder
water drain hose
The waste pipe must only be
connected to the foul drains and
not the surface water drainage
system.
Make sure you do not raise the
drain hose above 10cm from
the outlet on the dishwasher.
Your dishwasher will not drain
properly if you raise the hose by
more than 10cm.
Do not forcefully bend the drain
hose.
You may use the u-shaped drain
hose holder to secure your drain
hose and to avoid bending it.
Please close the hydrant after use.
18. After connecting the hoses, check all connections for leaks.
LID60W20_IB_RC_Final210603.indd 10LID60W20_IB_RC_Final210603.indd 10 3/6/2021 5:42 PM3/6/2021 5:42 PM

Related product manuals