Logik LTT68S12E User Manual

6. Unscrew and remove the bottom hinge
pin, turn the bracket over and replace it.
Unscrew
Screw
7. Refit the bracket fitting the bottom hinge
pin. Replace both adjustable feet.
Screw
8. Place the door back on. Ensure the door
is aligned horizontally and vertically
so that the seals are closed on all sides
before finally tightening the top hinge.
9. Insert the hinge bracket and screw it to
the top of the unit.
10. Use a spanner to tighten it if necessary.
15
INSTALLATION

Logik LTT68S12E Specifications

General

Brand	Logik
Model	LTT68S12E
Category	Refrigerator
Language	English