EasyManuals Logo
Home>Logik>Refrigerator>LTT68S12E

Logik LTT68S12E User Manual

Logik LTT68S12E
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
11. Put the hinge cover and the screw cover
back.
12. With the door closed, check that the
door is aligned horizontally and vertically
and that the seals are closed on all sides
before finally tightening the bottom
hinge. Re-adjust the levelling feet as
needed.
Before Using Your Unit
Before placing any food in your unit, turn it on and wait for 24 hours, to make sure it is
working properly and to allow it time to fall to the correct temperature. Your unit should not
be overfilled.
Cleaning Before Use
Wipe the inside of the unit with a weak solution of bicarbonate soda. Then rinse with warm
water using a ‘wrung-out sponge or cloth. Wash the shelves in warm soapy water and dry
completely before replacing in the unit. Clean the exterior of the unit with a damp cloth.
If you require more information refer to the Cleaning section.
The ice box compartment is for ice only and not for freezing food.
Before Plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the
unit.
Before Turning On!
Do not turn on until two hours after moving the unit. The coolant fluid needs time
to settle.
16
INSTALLATION

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Logik LTT68S12E and is the answer not in the manual?

Logik LTT68S12E Specifications

General IconGeneral
BrandLogik
ModelLTT68S12E
CategoryRefrigerator
LanguageEnglish

Related product manuals