Logitech G G403 Wireless - Set Default DPI; Assign Shift DPI; Change Report Rate; Customize Button Functions

o Assign Default — (Required) One DPI level must always be the default. To
change the default, click a DPI level that doesn't have a blue diamond above it,
and then click Assign Default. This is the DPI level the mouse will return to
when you:
 Press the default DPI button
 Switch between profiles
 Power up the computer
 Wake the computer from sleep mode
o Assign Shift — (Optional) You can quickly activate a DPI level when you press
the DPI Shift button. For example, you can set Assign Shift to a low DPI value,
which will temporarily give you extreme precision. When you release the button,
the mouse will revert back to the current DPI level. To set the Shift DPI, select a
DPI level that isn't highlighted in orange, and then click Assign Shift.
TIP: Buttons you assign as DPI Up, DPI Down and DPI Cycle will enable you to
change between DPI levels rapidly.
4. Change the Report Rate, if you prefer something other than the default of 1000
reports/second (1ms response time). The Report Rate controls how often your mouse
updates its position to the computer. You can:
o Decrease processor use by reducing the report rate.
o Increase the mouse response rate by raising the report rate.
TIP: For most PCs, a report rate of 500 is recommended.
5. To customize the functions for your mouse buttons, right-click on the button you want to
personalize and then select:
o Assign New Command
o Edit Command
o Use Generic
o Unassign
Your changes are automatically saved.
NOTE: For help customizing mouse functions for your gaming mouse buttons, see
Programming gaming-mouse buttons using Logitech Gaming Software.
 +Check battery status and charge the G403 or G703 wireless gaming mouse
 Battery life for the G403 and G703
 Check G403 or G703 battery status
 Charge the G403 or G703 battery
Battery life for the G403 and G703
Your gaming mouse uses a rechargeable 750mAH LiPol battery. With a 1 ms report rate, the
expected battery life is up to 30 hours of non-stop gaming with the lighting off, or 22 hours of
non-stop gaming with RGB color cycling on.
NOTE: Decreasing the mouse report rate will improve battery life performance.
Check G403 or G703 battery status