Logitech G PS28 User Manual

16
To change the prole on the y
1. Press the clutch button. The LEDs on your clutch and on the main POV control on
youright stick begin to ash on and o. Pressing buttons does not aect the game
inprogress when the clutch is engaged.
2. Move the main POV control on your ight stick up (north) or down (south) to scroll
through your proles. As you do this, the prole names are displayed in the bottom row
of the centre section of the MFD.
Note: You can use the MFD to access any folder on your computer. To open a folder, push
the POV to the right (east). To move up a level, scroll through the les and folders in the
current folder until [...] isdisplayed, and then push the POV to the right (east).
3. Select the prole you want by moving the main POV control right (east) when the
prole’s name is displayed on the MFD. It becomes the current prole and its settings are
applied when you resume the game in progress.
Tip: You can clear the current prole by moving the POV left (west). The buttons on
yourstick and throttle return to their default settings.
4. Release the clutch. The way you do this depends on your clutch settings. Either stop
pressing the clutch button or press and release it.
Viewing the time and date
The lower part of the MFD displays the current time and date:
This part of the MFD can also be used as
a stopwatch. You toggle between the two
features by pressing the Function button.
See Using the stopwatch, below, for more
information about this feature.

Logitech G PS28 Specifications

General

Brand	Logitech G
Model	PS28
Category	Video Game Controller
Language	English