Logitech A50 X User Manual

25ENGLISH
4.6 DOCKING AND CHARGING HOW TO
The A50 X requires a dedicated external power source. Please use the included AC adapter and USB Combo (Y) Cable. For details,
please see section 3.2 Connecting to TV and Power.
Aer each session of use, it is recommended to keep the A50 X headset docked to the Base Station, this will allow the battery to stay
topped o and ready for use. Aer each session, we recommend docking the headset to the Base Station. Alternatively, the headset
includes a USB-C port (located on the right ear) to allow for wired charging during use or quick top os.
Use
1 Before docking, make sure the headset is in the correct orientation; the boom mic should be on the le-hand side and the button
controls should be facing you.
2 Make sure to ip the boom mic to the up (muted) position and the ear cups are not rotated or ipped inwards towards you.
3 Gently place the headset on the Base Station be sure to check both Le and Right tubes are extended to the same lengths
andpositions, this will help the headset align properly.
4 The Base Station has 4 LEDs indicating the headset’s battery state of charge, in 25% increments .
5 The headset has one LED integrated into the power switch:
• Power On/Battery Full: White.
• Sleep Mode: Breathing White.
• Battery Charging: Orange.
• Battery Low: Steady Red.
• Battery Critical (less than 15 minutes playtime remaining): Breathing Red.

Logitech A50 X Specifications

General

Brand	Logitech
Model	A50 X
Category	Headsets
Language	English