Logitech A50 X - PlayStation Setup Procedure

13ENGLISH
1 Insert an HDMI (not included) and a USB cable
from the PlayStation console into the pair of ports
labeled “PS” on the rear of the A50 X Base Station.
2 Make sure the supplied USB Combo (Y) Cable and
Power Adapter is plugged into the Base Station’s
USB-C port labeled 5V DC and outlined in red.
The product will not function without dedicated
external power.
• Make sure both cables are plugged into
thesame pair of ports as indicated or Game/
Voice balancing will not work.
• Though not required, it is recommended
theHDMI cable used is rated for 2.1 Ultra
HighSpeed. Please see section 3.8 About HDMI
for more information.
3.4 CONNECTING TO PLAYSTATION
PSXBOX
HDMI OUT
PC