STEP 4: ATTACH CAMERA TO THE MOUNT
Place the webcam into the magnet
attachment point on top of the mount.
Listen for an audible click indicating the
webcam is properly seated on the mount.
(Optional) Placement without
the micro-suction pad
Slide the removable mount adapter
down to remove it from the webcam
foot. Adjust the foot on the mounting
clip until it is ush with the back of your
device and press rmly in place.
STEP 3: MOUNT ADAPTOR REMOVAL AND
CLEANING
1. Remove the webcam from mount and gently
peel the adaptor from one corner to remove.
2. With a wet nger gently rub the pad clear of
dust and dirt and let the micro-suction pad air
dry completely before remounting (do not use
cloth or tissue to dry).
3. Repeat the monitor placement setup steps to
best deploy your webcam.
5English
To Next Page
Loading...
