Logitech BRIO 505 - WHATS IN THE BOX; DETERMINE MOUNT PLACEMENT; Placement with micro-suction pad

STEP 1: WHAT’S IN THE BOX
1. Webcam with attached
USB-C cable
2. Mount clip with removable
mount adaptor
3. User documentation
STEP 2: DETERMINE MOUNT PLACEMENT
Placement to allow one-handed camera
adjustments (using micro-suction pad)
1. Determine the best placement for your
webcam before continuing.
2. Wipe the back of your monitor to clear
any dust or dirt.
USB-C
3. Remove the protective lm from the
micro-suction pad.
Note:
– The mount adaptor can be removed and reused
for mounting adjustments without leaving residue.
– To clean the micro-suction pad, rinse with water
to remove debris, and let it air dry in order to
regain strong suction.
4. Open the mount fully and place
on top of your monitor, being sure
that the pad of the front clip makes
contact with the front of the monitor.
5. Rotate the rear foot down until it
makes contact with the back of the
monitor.
6. Press the micro-suction pad to the
back of your monitor rmly to create
a good bond.
4English