Logitech FLIGHT YOKE SYSTEM - Installation for Windows 10, Windows 8.1 and Windows 7; Driver Installation

7 English
Now, connect the Throttle Quadrant to the Flight Yoke with
the PS/2 connector provided.
Use the integrated USB Hub on the side of the Flight Yoke to easily
connect other parts of the Logitech G Flight range of products,
such as additional Flight Throttle Quadrants, Flight Rudder Pedals,
or other peripherals.
INSTALLATION FOR WINDOWS
®
10, WINDOWS
®
8.1
ANDWINDOWS
®
7
DRIVER INSTALLATION
1 Visit logitech.com/support/yoke to download the latest drivers and software
for your operating system.
2 With device disconnected, follow the onscreen instructions to complete the
installation.
3 At the Driver Setup screen, only when prompted, insert USB cable into one of
your computer’s USB ports, then click Next.
4 At the Driver Setup screen, click Next to test your controller.
5 Follow the on screen prompts to test the controls and verify device operation.
After the test, click OK.