G29 Driving Force Racing Wheel FAQs 39
NOTE: Before mounting and securing the wheel unit, make sure to connect the power adapter,
pedal unit, and Driving Force Shifter attachment (where applicable) to the connection ports
on the underside of the wheel unit. See the Cable Management section for details.
To use the clamping system to mount the wheel unit:
1. Push down and then rotate the clamp knobs to lock or unlock.
2. Rotate the clamp knobs to tighten or loosen clamps.
NOTE: You can use the included clamp extenders for thinner tables. The clamp extenders
should be removed before mounting the wheel unit to thicker tables or desks.
Pedal Unit
The pedal unit can be placed on the floor or mounted to a racing rig using built-in bolt
mounting points. The retractable carpet grip system increases the unit’s traction when
placed on carpets. Push the retaining clip towards the rear of the pedal unit to release the
grip system. Push the carpet grip into the unit until it clicks to retract.
To Next Page
Loading...
