Logitech G29

G29 Driving Force Racing Wheel FAQs 47
To mount the wheel unit to a racing rig using the bolt mounting points, you’ll need two (2)
M6X1 screws to securely fasten the wheel unit to the racing rig.
NOTE: Bolt mounting may also be supplemented with the built-in clamping system (where
applicable). For more information on using the clamping system, see Mount and secure the
G29 racing wheel using the clamping system.
Pedal Unit
The pedal units on the G29 racing wheels are also equipped with built-in bolt mounting
points that can be used to secure the pedal unit to a racing rig.
To mount the pedal unit to a racing rig using the bolt mounting points, you’ll need six (6) M6X1
screws to securely fasten the pedal unit to the racing rig.