NOTE: You can also connect the LIGHTSPEED receiver directly to a USB port on your
computer.
3. Use your thumb to push the power switch at the bottom of the mouse upwards into the
LO (endurance mode) or HI (performance mode) position:
o Endurance mode: The report rate of the mouse is fixed at 8 ms (125 Hz) to
maximize battery life. The report rate in endurance mode cannot be adjusted using
Logitech Gaming Software (LGS).
o Performance mode: By default, the mouse report rate is set to 1 ms (1000 Hz).
After installing LGS, you can increase the report rate in performance mode to 2
ms (500 Hz), 4 ms (250 Hz) or 8 ms (125 Hz).
4. The mouse and LIGHTSPEED receiver connect automatically. If you lift the mouse, the
LED at the bottom turns solid white for 2 seconds. For more information about the LED
indicators, see LED Indicators on the G603 gaming mouse.
TIPS:
Keep the mouse and receiver at least 2 m from wireless routers or other 2.4GHz wireless
devices to minimize environmental noise.
To ensure optimal performance in noisy wireless environments, we recommend that you
keep the receiver within 20 cm of the mouse.
To Next Page
Loading...
