3 ENGLISH
SETUP INSTRUCTIONS
1 Remove the protective lm on the bottom side of the mouse
before use. This lm is designed to protect the sensor from
dust during transport, and your mouse may not function
unless this is removed.
2 A wireless receiver, USB adapter, and optional 10g weight can
be found in theaccessory box. Plug one end of the cable into
your PC, andtheother end into the USB adapter and receiver.
– The receiver can also be used plugged directly into
yourPC. However, using the cable and adapter when
in wireless mode is recommended and allows for better
connectivity and easy access to the cable for recharging.
3 Turn mouse on via the switch on the bottom of the mouse.
1
2
3
10g
To Next Page
Loading...
Need help?
General
