Logitech G923 - Using the Clamping System; Wheel Unit Clamping

G923 TRUEFORCE Racing Wheel for Xbox and PC FAQs 25
●
Mount and secure the G923 racing wheel using the clamping system
○ Wheel Unit
○ Pedal Unit
○ Cable Management
NOTE: For details on mounting the G923 racing wheels using bolts, see Mount and secure the
G923 racing wheel using built-in bolt mounting points.
Wheel Unit
G923 racing wheels are equipped with a built-in clamping system that can be mounted to a
table or desk or mounted to a racing rig using built-in bolt mounting points.
NOTE: Before mounting and securing the wheel unit, make sure to connect the power adapter,
pedal unit, and Driving Force Shifter attachment (where applicable) to the connection ports
on the underside of the wheel unit. See the Cable Management section for details.
To use the clamping system to mount the wheel unit:
1. Push down and then rotate the clamp knobs to lock or unlock.
2. Rotate the clamp knobs to tighten or loosen clamps.