Logitech G933 Artemis Spectrum User Manual

Logitech® G933 Artemis Spectrum
8 English
Idle sleep mode
G933 Artemis Spectrum will go into sleep
mode to conserve battery power when
it has not received an audio signal in
5 minutes.
In idle sleep mode, the unit’s lighting will
turn o, and it will disconnect from the USB
wireless mix adapter.
To wake up your headset from sleep mode,
press any button on the unit.
Your unit will continue to use battery
power at a reduced rate while in idle sleep
mode. If you plan to leave your headset
idle for an extended period of time,
turn o your headset and plug it in via USB
to charge.
On/O tones and lights
When your headset is turned on, it will play
a tone to indicate that your headset has
turned on. The lights will perform a power
on light cycle sequence, then switch to
the currently selected lighting.
When the unit is turned o, lights will
switch to blue and fade out while
it powers down.

Logitech G933 Artemis Spectrum Specifications

General

Backlight	Yes
Headset type	Binaural
Product type	Headset
Product color	Black
Wearing style	Head-band
Backlight color	Various
Recommended usage	Gaming
Frequency band	2.4 GHz
Wireless range	20 m
2x 3.5 mm connectors	No
Connectivity technology	Wired & Wireless
Impedance	39 Ω
Driver unit	40 mm
Magnet type	-
Ear coupling	Circumaural
Headphone frequency	20 - 20000 Hz
Headphone sensitivity	107 dB
Audio output channels	7.1 channels
Quantity	1
Cables included	Audio (3.5mm), USB
Microphone type	Boom
Microphone frequency	100 - 20000 Hz
Microphone direction type	Unidirectional/Cardioid
Continuous audio playback time	12 h