Logitech Harmony - Page 6

© 2009 Logitech. All rights reserved. Logitech, the Logitech logo, and other Logitech marks are
owned by Logitech and may be registered. All other trademarks are the property of their
respective owners. Logitech assumes no responsibility for any errors that may appear in this
manual. Information contained herein is subject to change without notice.
“PLAYSTATION” is a registered trademark of Sony Computer Entertainment Inc.
620-001771.002
English
Add the PLAYSTATION 3 to your Harmony remote account
To complete installation, add the PLAYSTATION 3 to your online Harmony
remote account, but you will not add the Harmony Adapter.
Note If you already have a PLAYSTATION 3 in your online account, you
will need to remove it, and then you will add it back in order to
receive the latest updates enabling the Harmony Adapter to
control the PLAYSTATION 3.
1. Log into your online Harmony remote account. If you already have a
PLAYSTATION 3 in your account, remove it now. All associated activities
for the PLAYSTATION 3 will also be removed.
2. Add the PLAYSTATION 3 to your account.
3. Set up activities for the PLAYSTATION 3.
4. Connect your Harmony remote to your computer’s USB port, and then
update the remote. (Refer to the Harmony Quick-start guide for more
information about updating a Harmony remote.)
Deutsch
Add the PLAYSTATION 3 to your Harmony remote account
To complete installation, add the PLAYSTATION 3 to your online Harmony
remote account, but you will not add the Harmony Adapter.
Note If you already have a PLAYSTATION 3 in your online account, you
will need to remove it, and then you will add it back in order to
receive the latest updates enabling the Harmony Adapter to
control the PLAYSTATION 3.
1. Log into your online Harmony remote account. If you already have a
PLAYSTATION 3 in your account, remove it now. All associated activities
for the PLAYSTATION 3 will also be removed.
2. Add the PLAYSTATION 3 to your account.
3. Set up activities for the PLAYSTATION 3.
4. Connect your Harmony remote to your computer’s USB port, and then
update the remote. (Refer to the Harmony Quick-start guide for more
information about updating a Harmony remote.)
Français
Add the PLAYSTATION 3 to your Harmony remote account
To complete installation, add the PLAYSTATION 3 to your online Harmony
remote account, but you will not add the Harmony Adapter.
Note If you already have a PLAYSTATION 3 in your online account, you
will need to remove it, and then you will add it back in order to
receive the latest updates enabling the Harmony Adapter to
control the PLAYSTATION 3.
1. Log into your online Harmony remote account. If you already have a
PLAYSTATION 3 in your account, remove it now. All associated activities
for the PLAYSTATION 3 will also be removed.
2. Add the PLAYSTATION 3 to your account.
3. Set up activities for the PLAYSTATION 3.
4. Connect your Harmony remote to your computer’s USB port, and then
update the remote. (Refer to the Harmony Quick-start guide for more
information about updating a Harmony remote.)
По-ру сски
Add the PLAYSTATION 3 to your Harmony remote account
To complete installation, add the PLAYSTATION 3 to your online Harmony
remote account, but you will not add the Harmony Adapter.
Note If you already have a PLAYSTATION 3 in your online account, you
will need to remove it, and then you will add it back in order to
receive the latest updates enabling the Harmony Adapter to
control the PLAYSTATION 3.
1. Log into your online Harmony remote account. If you already have a
PLAYSTATION 3 in your account, remove it now. All associated activities
for the PLAYSTATION 3 will also be removed.
2. Add the PLAYSTATION 3 to your account.
3. Set up activities for the PLAYSTATION 3.
4. Connect your Harmony remote to your computer’s USB port, and then
update the remote. (Refer to the Harmony Quick-start guide for more
information about updating a Harmony remote.)
Po polsku
Add the PLAYSTATION 3 to your Harmony remote account
To complete installation, add the PLAYSTATION 3 to your online Harmony
remote account, but you will not add the Harmony Adapter.
Note If you already have a PLAYSTATION 3 in your online account, you
will need to remove it, and then you will add it back in order to
receive the latest updates enabling the Harmony Adapter to
control the PLAYSTATION 3.
1. Log into your online Harmony remote account. If you already have a
PLAYSTATION 3 in your account, remove it now. All associated activities
for the PLAYSTATION 3 will also be removed.
2. Add the PLAYSTATION 3 to your account.
3. Set up activities for the PLAYSTATION 3.
4. Connect your Harmony remote to your computer’s USB port, and then
update the remote. (Refer to the Harmony Quick-start guide for more
information about updating a Harmony remote.)
У країнська
Add the PLAYSTATION 3 to your Harmony remote account
To complete installation, add the PLAYSTATION 3 to your online Harmony
remote account, but you will not add the Harmony Adapter.
Note If you already have a PLAYSTATION 3 in your online account, you
will need to remove it, and then you will add it back in order to
receive the latest updates enabling the Harmony Adapter to
control the PLAYSTATION 3.
1. Log into your online Harmony remote account. If you already have a
PLAYSTATION 3 in your account, remove it now. All associated activities
for the PLAYSTATION 3 will also be removed.
2. Add the PLAYSTATION 3 to your account.
3. Set up activities for the PLAYSTATION 3.
4. Connect your Harmony remote to your computer’s USB port, and then
update the remote. (Refer to the Harmony Quick-start guide for more
information about updating a Harmony remote.)
Magyar
Add the PLAYSTATION 3 to your Harmony remote account
To complete installation, add the PLAYSTATION 3 to your online Harmony
remote account, but you will not add the Harmony Adapter.
Note If you already have a PLAYSTATION 3 in your online account, you
will need to remove it, and then you will add it back in order to
receive the latest updates enabling the Harmony Adapter to
control the PLAYSTATION 3.
1. Log into your online Harmony remote account. If you already have a
PLAYSTATION 3 in your account, remove it now. All associated activities
for the PLAYSTATION 3 will also be removed.
2. Add the PLAYSTATION 3 to your account.
3. Set up activities for the PLAYSTATION 3.
4. Connect your Harmony remote to your computer’s USB port, and then
update the remote. (Refer to the Harmony Quick-start guide for more
information about updating a Harmony remote.)
Slovenčina
Add the PLAYSTATION 3 to your Harmony remote account
To complete installation, add the PLAYSTATION 3 to your online Harmony
remote account, but you will not add the Harmony Adapter.
Note If you already have a PLAYSTATION 3 in your online account, you
will need to remove it, and then you will add it back in order to
receive the latest updates enabling the Harmony Adapter to
control the PLAYSTATION 3.
1. Log into your online Harmony remote account. If you already have a
PLAYSTATION 3 in your account, remove it now. All associated activities
for the PLAYSTATION 3 will also be removed.
2. Add the PLAYSTATION 3 to your account.
3. Set up activities for the PLAYSTATION 3.
4. Connect your Harmony remote to your computer’s USB port, and then
update the remote. (Refer to the Harmony Quick-start guide for more
information about updating a Harmony remote.)
Бълг арски
Add the PLAYSTATION 3 to your Harmony remote account
To complete installation, add the PLAYSTATION 3 to your online Harmony
remote account, but you will not add the Harmony Adapter.
Note If you already have a PLAYSTATION 3 in your online account, you
will need to remove it, and then you will add it back in order to
receive the latest updates enabling the Harmony Adapter to
control the PLAYSTATION 3.
1. Log into your online Harmony remote account. If you already have a
PLAYSTATION 3 in your account, remove it now. All associated activities
for the PLAYSTATION 3 will also be removed.
2. Add the PLAYSTATION 3 to your account.
3. Set up activities for the PLAYSTATION 3.
4. Connect your Harmony remote to your computer’s USB port, and then
update the remote. (Refer to the Harmony Quick-start guide for more
information about updating a Harmony remote.)
Română
Add the PLAYSTATION 3 to your Harmony remote account
To complete installation, add the PLAYSTATION 3 to your online Harmony
remote account, but you will not add the Harmony Adapter.
Note If you already have a PLAYSTATION 3 in your online account, you
will need to remove it, and then you will add it back in order to
receive the latest updates enabling the Harmony Adapter to
control the PLAYSTATION 3.
1. Log into your online Harmony remote account. If you already have a
PLAYSTATION 3 in your account, remove it now. All associated activities
for the PLAYSTATION 3 will also be removed.
2. Add the PLAYSTATION 3 to your account.
3. Set up activities for the PLAYSTATION 3.
4. Connect your Harmony remote to your computer’s USB port, and then
update the remote. (Refer to the Harmony Quick-start guide for more
information about updating a Harmony remote.)
Hrvatski
Add the PLAYSTATION 3 to your Harmony remote account
To complete installation, add the PLAYSTATION 3 to your online Harmony
remote account, but you will not add the Harmony Adapter.
Note If you already have a PLAYSTATION 3 in your online account, you
will need to remove it, and then you will add it back in order to
receive the latest updates enabling the Harmony Adapter to
control the PLAYSTATION 3.
1. Log into your online Harmony remote account. If you already have a
PLAYSTATION 3 in your account, remove it now. All associated activities
for the PLAYSTATION 3 will also be removed.
2. Add the PLAYSTATION 3 to your account.
3. Set up activities for the PLAYSTATION 3.
4. Connect your Harmony remote to your computer’s USB port, and then
update the remote. (Refer to the Harmony Quick-start guide for more
information about updating a Harmony remote.)
Srpski
Add the PLAYSTATION 3 to your Harmony remote account
To complete installation, add the PLAYSTATION 3 to your online Harmony
remote account, but you will not add the Harmony Adapter.
Note If you already have a PLAYSTATION 3 in your online account, you
will need to remove it, and then you will add it back in order to
receive the latest updates enabling the Harmony Adapter to
control the PLAYSTATION 3.
1. Log into your online Harmony remote account. If you already have a
PLAYSTATION 3 in your account, remove it now. All associated activities
for the PLAYSTATION 3 will also be removed.
2. Add the PLAYSTATION 3 to your account.
3. Set up activities for the PLAYSTATION 3.
4. Connect your Harmony remote to your computer’s USB port, and then
update the remote. (Refer to the Harmony Quick-start guide for more
information about updating a Harmony remote.)
Slovenščina
Add the PLAYSTATION 3 to your Harmony remote account
To complete installation, add the PLAYSTATION 3 to your online Harmony
remote account, but you will not add the Harmony Adapter.
Note If you already have a PLAYSTATION 3 in your online account, you
will need to remove it, and then you will add it back in order to
receive the latest updates enabling the Harmony Adapter to
control the PLAYSTATION 3.
1. Log into your online Harmony remote account. If you already have a
PLAYSTATION 3 in your account, remove it now. All associated activities
for the PLAYSTATION 3 will also be removed.
2. Add the PLAYSTATION 3 to your account.
3. Set up activities for the PLAYSTATION 3.
4. Connect your Harmony remote to your computer’s USB port, and then
update the remote. (Refer to the Harmony Quick-start guide for more
information about updating a Harmony remote.)
Eesti
Add the Harmony Adapter for PLAYSTATION 3 as a device to your
Harmony remote setup at http://myremotesetup.com
•
You must already have a Harmony remote account set up. (Refer to the
Harmony Quick-start guide.)
•
Turn on your computer (1).
•
Connect your Harmony remote (2) to your computer’s USB port.
•
Launch your Internet browser and go to http://myremotesetup.com
•
After logging in, click on the Devices tab, and then Add Device.
•
Choose Game Console (With DVD) from the drop-down menu.
•
In the Manufacturer menu, select Logitech, and then type in
Harmony Adapter for PS3 into the model field.
Latviski
Add the PLAYSTATION 3 to your Harmony remote account
To complete installation, add the PLAYSTATION 3 to your online Harmony
remote account, but you will not add the Harmony Adapter.
Note If you already have a PLAYSTATION 3 in your online account, you
will need to remove it, and then you will add it back in order to
receive the latest updates enabling the Harmony Adapter to
control the PLAYSTATION 3.
1. Log into your online Harmony remote account. If you already have a
PLAYSTATION 3 in your account, remove it now. All associated activities
for the PLAYSTATION 3 will also be removed.
2. Add the PLAYSTATION 3 to your account.
3. Set up activities for the PLAYSTATION 3.
4. Connect your Harmony remote to your computer’s USB port, and then
update the remote. (Refer to the Harmony Quick-start guide for more
information about updating a Harmony remote.)
My Activities
1/2 pages 4:51
Off
Settings
Devices
Activities
Menu Info
Guide
Exit
OK
+
+
Help
1
4
7
2
5
8
0
3
6
9
E
*
+
1
2
English
Troubleshooting – Harmony Adapter isn’t working
•
Check to make sure that your PLAYSTATION 3 and TV are
powered on.
•
Point the Harmony remote directly at the Harmony Adapter.
In order to work properly, the Harmony Adapter must have a
direct line of sight with the Harmony remote.
•
Move closer. The operating range is up to 10 meters.
•
Check the batteries in the Harmony remote and replace if
necessary.
•
Check the power supply connection to the Harmony Adapter.
•
Pair the Harmony Adapter again with the PLAYSTATION 3.
Refer to step 3 for more information.
•
The Harmony remote must be loaded with the Harmony
Adapter’s unique ID in order for it to operate. Refer to step 5
for more information.
Deutsch
Troubleshooting – Harmony Adapter isn’t working
•
Check to make sure that your PLAYSTATION 3 and TV are
powered on.
•
Point the Harmony remote directly at the Harmony Adapter.
In order to work properly, the Harmony Adapter must have a
direct line of sight with the Harmony remote.
•
Move closer. The operating range is up to 10 meters.
•
Check the batteries in the Harmony remote and replace if
necessary.
•
Check the power supply connection to the Harmony Adapter.
•
Pair the Harmony Adapter again with the PLAYSTATION 3.
Refer to step 3 for more information.
•
The Harmony remote must be loaded with the Harmony
Adapter’s unique ID in order for it to operate. Refer to step 5
for more information.
Français
Troubleshooting – Harmony Adapter isn’t working
•
Check to make sure that your PLAYSTATION 3 and TV are
powered on.
•
Point the Harmony remote directly at the Harmony Adapter.
In order to work properly, the Harmony Adapter must have a
direct line of sight with the Harmony remote.
•
Move closer. The operating range is up to 10 meters.
•
Check the batteries in the Harmony remote and replace if
necessary.
•
Check the power supply connection to the Harmony Adapter.
•
Pair the Harmony Adapter again with the PLAYSTATION 3.
Refer to step 3 for more information.
•
The Harmony remote must be loaded with the Harmony
Adapter’s unique ID in order for it to operate. Refer to step 5
for more information.
По-ру сски
Troubleshooting – Harmony Adapter isn’t working
•
Check to make sure that your PLAYSTATION 3 and TV are
powered on.
•
Point the Harmony remote directly at the Harmony Adapter.
In order to work properly, the Harmony Adapter must have a
direct line of sight with the Harmony remote.
•
Move closer. The operating range is up to 10 meters.
•
Check the batteries in the Harmony remote and replace if
necessary.
•
Check the power supply connection to the Harmony Adapter.
•
Pair the Harmony Adapter again with the PLAYSTATION 3.
Refer to step 3 for more information.
•
The Harmony remote must be loaded with the Harmony
Adapter’s unique ID in order for it to operate. Refer to step 5
for more information.
Po polsku
Troubleshooting – Harmony Adapter isn’t working
•
Check to make sure that your PLAYSTATION 3 and TV are
powered on.
•
Point the Harmony remote directly at the Harmony Adapter.
In order to work properly, the Harmony Adapter must have a
direct line of sight with the Harmony remote.
•
Move closer. The operating range is up to 10 meters.
•
Check the batteries in the Harmony remote and replace if
necessary.
•
Check the power supply connection to the Harmony Adapter.
•
Pair the Harmony Adapter again with the PLAYSTATION 3.
Refer to step 3 for more information.
•
The Harmony remote must be loaded with the Harmony
Adapter’s unique ID in order for it to operate. Refer to step 5
for more information.
У країнська
Troubleshooting – Harmony Adapter isn’t working
•
Check to make sure that your PLAYSTATION 3 and TV are
powered on.
•
Point the Harmony remote directly at the Harmony Adapter.
In order to work properly, the Harmony Adapter must have a
direct line of sight with the Harmony remote.
•
Move closer. The operating range is up to 10 meters.
•
Check the batteries in the Harmony remote and replace if
necessary.
•
Check the power supply connection to the Harmony Adapter.
•
Pair the Harmony Adapter again with the PLAYSTATION 3.
Refer to step 3 for more information.
•
The Harmony remote must be loaded with the Harmony
Adapter’s unique ID in order for it to operate. Refer to step 5
for more information.
Magyar
Troubleshooting – Harmony Adapter isn’t working
•
Check to make sure that your PLAYSTATION 3 and TV are
powered on.
•
Point the Harmony remote directly at the Harmony Adapter.
In order to work properly, the Harmony Adapter must have a
direct line of sight with the Harmony remote.
•
Move closer. The operating range is up to 10 meters.
•
Check the batteries in the Harmony remote and replace if
necessary.
•
Check the power supply connection to the Harmony Adapter.
•
Pair the Harmony Adapter again with the PLAYSTATION 3.
Refer to step 3 for more information.
•
The Harmony remote must be loaded with the Harmony
Adapter’s unique ID in order for it to operate. Refer to step 5
for more information.
Slovenčina
Troubleshooting – Harmony Adapter isn’t working
•
Check to make sure that your PLAYSTATION 3 and TV are
powered on.
•
Point the Harmony remote directly at the Harmony Adapter.
In order to work properly, the Harmony Adapter must have a
direct line of sight with the Harmony remote.
•
Move closer. The operating range is up to 10 meters.
•
Check the batteries in the Harmony remote and replace if
necessary.
•
Check the power supply connection to the Harmony Adapter.
•
Pair the Harmony Adapter again with the PLAYSTATION 3.
Refer to step 3 for more information.
•
The Harmony remote must be loaded with the Harmony
Adapter’s unique ID in order for it to operate. Refer to step 5
for more information.
Бълг арски
Troubleshooting – Harmony Adapter isn’t working
•
Check to make sure that your PLAYSTATION 3 and TV are
powered on.
•
Point the Harmony remote directly at the Harmony Adapter.
In order to work properly, the Harmony Adapter must have a
direct line of sight with the Harmony remote.
•
Move closer. The operating range is up to 10 meters.
•
Check the batteries in the Harmony remote and replace if
necessary.
•
Check the power supply connection to the Harmony Adapter.
•
Pair the Harmony Adapter again with the PLAYSTATION 3.
Refer to step 3 for more information.
•
The Harmony remote must be loaded with the Harmony
Adapter’s unique ID in order for it to operate. Refer to step 5
for more information.
Română
Troubleshooting – Harmony Adapter isn’t working
•
Check to make sure that your PLAYSTATION 3 and TV are
powered on.
•
Point the Harmony remote directly at the Harmony Adapter.
In order to work properly, the Harmony Adapter must have a
direct line of sight with the Harmony remote.
•
Move closer. The operating range is up to 10 meters.
•
Check the batteries in the Harmony remote and replace if
necessary.
•
Check the power supply connection to the Harmony Adapter.
•
Pair the Harmony Adapter again with the PLAYSTATION 3.
Refer to step 3 for more information.
•
The Harmony remote must be loaded with the Harmony
Adapter’s unique ID in order for it to operate. Refer to step 5
for more information.
Hrvatski
Troubleshooting – Harmony Adapter isn’t working
•
Check to make sure that your PLAYSTATION 3 and TV are
powered on.
•
Point the Harmony remote directly at the Harmony Adapter.
In order to work properly, the Harmony Adapter must have a
direct line of sight with the Harmony remote.
•
Move closer. The operating range is up to 10 meters.
•
Check the batteries in the Harmony remote and replace if
necessary.
•
Check the power supply connection to the Harmony Adapter.
•
Pair the Harmony Adapter again with the PLAYSTATION 3.
Refer to step 3 for more information.
•
The Harmony remote must be loaded with the Harmony
Adapter’s unique ID in order for it to operate. Refer to step 5
for more information.
Srpski
Troubleshooting – Harmony Adapter isn’t working
•
Check to make sure that your PLAYSTATION 3 and TV are
powered on.
•
Point the Harmony remote directly at the Harmony Adapter.
In order to work properly, the Harmony Adapter must have a
direct line of sight with the Harmony remote.
•
Move closer. The operating range is up to 10 meters.
•
Check the batteries in the Harmony remote and replace if
necessary.
•
Check the power supply connection to the Harmony Adapter.
•
Pair the Harmony Adapter again with the PLAYSTATION 3.
Refer to step 3 for more information.
•
The Harmony remote must be loaded with the Harmony
Adapter’s unique ID in order for it to operate. Refer to step 5
for more information.
Slovenščina
Troubleshooting – Harmony Adapter isn’t working
•
Check to make sure that your PLAYSTATION 3 and TV are
powered on.
•
Point the Harmony remote directly at the Harmony Adapter.
In order to work properly, the Harmony Adapter must have a
direct line of sight with the Harmony remote.
•
Move closer. The operating range is up to 10 meters.
•
Check the batteries in the Harmony remote and replace if
necessary.
•
Check the power supply connection to the Harmony Adapter.
•
Pair the Harmony Adapter again with the PLAYSTATION 3.
Refer to step 3 for more information.
•
The Harmony remote must be loaded with the Harmony
Adapter’s unique ID in order for it to operate. Refer to step 5
for more information.
Eesti
Troubleshooting – Harmony Adapter isn’t working
•
Check to make sure that your PLAYSTATION 3 and TV are
powered on.
•
Point the Harmony remote directly at the Harmony Adapter.
In order to work properly, the Harmony Adapter must have a
direct line of sight with the Harmony remote.
•
Move closer. The operating range is up to 10 meters.
•
Check the batteries in the Harmony remote and replace if
necessary.
•
Check the power supply connection to the Harmony Adapter.
•
Pair the Harmony Adapter again with the PLAYSTATION 3.
Refer to step 3 for more information.
•
The Harmony remote must be loaded with the Harmony
Adapter’s unique ID in order for it to operate. Refer to step 5
for more information.
Latviski
Troubleshooting – Harmony Adapter isn’t working
•
Check to make sure that your PLAYSTATION 3 and TV are
powered on.
•
Point the Harmony remote directly at the Harmony Adapter.
In order to work properly, the Harmony Adapter must have a
direct line of sight with the Harmony remote.
•
Move closer. The operating range is up to 10 meters.
•
Check the batteries in the Harmony remote and replace if
necessary.
•
Check the power supply connection to the Harmony Adapter.
•
Pair the Harmony Adapter again with the PLAYSTATION 3.
Refer to step 3 for more information.
•
The Harmony remote must be loaded with the Harmony
Adapter’s unique ID in order for it to operate. Refer to step 5
for more information.
Lietuvių
Troubleshooting – Harmony Adapter isn’t working
•
Check to make sure that your PLAYSTATION 3 and TV are
powered on.
•
Point the Harmony remote directly at the Harmony Adapter.
In order to work properly, the Harmony Adapter must have a
direct line of sight with the Harmony remote.
•
Move closer. The operating range is up to 10 meters.
•
Check the batteries in the Harmony remote and replace if
necessary.
•
Check the power supply connection to the Harmony Adapter.
•
Pair the Harmony Adapter again with the PLAYSTATION 3.
Refer to step 3 for more information.
•
The Harmony remote must be loaded with the Harmony
Adapter’s unique ID in order for it to operate. Refer to step 5
for more information.
Italiano
Troubleshooting – Harmony Adapter isn’t working
•
Check to make sure that your PLAYSTATION 3 and TV are
powered on.
•
Point the Harmony remote directly at the Harmony Adapter.
In order to work properly, the Harmony Adapter must have a
direct line of sight with the Harmony remote.
•
Move closer. The operating range is up to 10 meters.
•
Check the batteries in the Harmony remote and replace if
necessary.
•
Check the power supply connection to the Harmony Adapter.
•
Pair the Harmony Adapter again with the PLAYSTATION 3.
Refer to step 3 for more information.
•
The Harmony remote must be loaded with the Harmony
Adapter’s unique ID in order for it to operate. Refer to step 5
for more information.
Česká verze
Troubleshooting – Harmony Adapter isn’t working
•
Check to make sure that your PLAYSTATION 3 and TV are
powered on.
•
Point the Harmony remote directly at the Harmony Adapter.
In order to work properly, the Harmony Adapter must have a
direct line of sight with the Harmony remote.
•
Move closer. The operating range is up to 10 meters.
•
Check the batteries in the Harmony remote and replace if
necessary.
•
Check the power supply connection to the Harmony Adapter.
•
Pair the Harmony Adapter again with the PLAYSTATION 3.
Refer to step 3 for more information.
•
The Harmony remote must be loaded with the Harmony
Adapter’s unique ID in order for it to operate. Refer to step 5
for more information.
?
+
5
Lietuvių
Add the PLAYSTATION 3 to your Harmony remote
account
To complete installation, add the PLAYSTATION 3 to your online
Harmony remote account, but you will not add the Harmony
Adapter.
Note If you already have a PLAYSTATION 3 in your online
account, you will need to remove it, and then you will
add it back in order to receive the latest updates enabling
the Harmony Adapter to control the PLAYSTATION 3.
1. Log into your online Harmony remote account. If you already
have a PLAYSTATION 3 in your account, remove it now. All
associated activities for the PLAYSTATION 3 will also be
removed.
2. Add the PLAYSTATION 3 to your account.
3. Set up activities for the PLAYSTATION 3.
4. Connect your Harmony remote to your computer’s USB port,
and then update the remote. (Refer to the Harmony
Quick-start guide for more information about updating a
Harmony remote.)
Italiano
Add the PLAYSTATION 3 to your Harmony remote
account
To complete installation, add the PLAYSTATION 3 to your online
Harmony remote account, but you will not add the Harmony
Adapter.
Note If you already have a PLAYSTATION 3 in your online
account, you will need to remove it, and then you will
add it back in order to receive the latest updates enabling
the Harmony Adapter to control the PLAYSTATION 3.
1. Log into your online Harmony remote account. If you already
have a PLAYSTATION 3 in your account, remove it now. All
associated activities for the PLAYSTATION 3 will also be
removed.
2. Add the PLAYSTATION 3 to your account.
3. Set up activities for the PLAYSTATION 3.
4. Connect your Harmony remote to your computer’s USB port,
and then update the remote. (Refer to the Harmony
Quick-start guide for more information about updating a
Harmony remote.)
Česká verze
Add the PLAYSTATION 3 to your Harmony remote
account
To complete installation, add the PLAYSTATION 3 to your online
Harmony remote account, but you will not add the Harmony
Adapter.
Note If you already have a PLAYSTATION 3 in your online
account, you will need to remove it, and then you will
add it back in order to receive the latest updates enabling
the Harmony Adapter to control the PLAYSTATION 3.
1. Log into your online Harmony remote account. If you already
have a PLAYSTATION 3 in your account, remove it now. All
associated activities for the PLAYSTATION 3 will also be
removed.
2. Add the PLAYSTATION 3 to your account.
3. Set up activities for the PLAYSTATION 3.
4. Connect your Harmony remote to your computer’s USB port,
and then update the remote. (Refer to the Harmony
Quick-start guide for more information about updating a
Harmony remote.)
3 4
http://supportinfo.harmonyremote.com