Logitech KEYS-TO-GO 2 - Page 8

CHANGE / REMOVE BATTERIES
1. When the keyboard is at critical battery level
(5% or below), the battery LED will pulse red.
2. Use a T5 screwdriver to remove both screws
on the battery tray.
CR2032
T5
3. Place the tip of the screwdriver into
theaccess hole on the battery tray.
4. Pull the battery tray out and replace
theoldbatteries with 2 new CR2032 coin
cell batteries.
5. Dispose of the batteries according
tolocallaws.
T5
8English