Getting Started - MX Keys for Mac
QUICK SETUP
Go to the interactive setup guide for quick interactive setup instructions.
If you want more in-depth information, go to the ‘Detailed Setup’ below.
DETAILED SETUP
1. Make sure the keyboard is turned on.
The number 1 LED on the keyboard should blink quickly.
NOTE: If the LED is not blinking quickly, perform a long press (three seconds).
2. Choose how you want to connect.
Important
FileVault is an encryption system available on some Mac computers. When enabled, it
might prevent Bluetooth® devices from connecting with your computer if you have not
yet logged in. If you have FileVault enabled, we recommend using a Logitech USB
receiver to use your mouse. If you need more information, click here.
o Use the included wireless receiver:
Plug the receiver into a USB port on your computer. If you are working on a
desktop, we recommend using the USB receiver.
To Next Page
Loading...
