● Pair Logitech mouse to iPad using Bluetooth
To pair your mouse to iPad, do the following:
1. Turn your mouse ON.
2. The LED should start blinking fast. If it doesn't, perform a long press on the Easy-Switch
button on the mouse.
3. Open the iPad Settings and tap Bluetooth settings.
4. Choose your mouse in the list of Devices.
● Warning message when Logitech device is connected to iPadOS
When you connect your Logitech device, you might see a warning message.
If this happens, make sure to connect only the devices you’ll be using. The more devices that
are connected, the more interference you might have between them.
If you are having connectivity issues, disconnect any Bluetooth accessories that you're not
using. To disconnect a device:
● In Settings > Bluetooth, tap the information button next to the device name, then tap
Disconnect.
● Bluetooth mouse or keyboard not recognized after reboot on macOS
(Intel-based Mac) - FileVault
If your Bluetooth mouse or keyboard does not reconnect after a reboot at the login screen
and only reconnects after the login, this might be related to FileVault encryption.
When FileVault is enabled, Bluetooth mice and keyboards will only re-connect after login.
To Next Page
Loading...
