Logitech PRO RACING WHEEL - INITIAL SETUP AND SOFTWARE; Power On and Platform Selection; Logitech G HUB Software Installation

7 ENGLISH
POWER ON AND SOFTWARE
1 Power on the wheel by pressing the Power button
on the front of the wheel base. The wheel rim
will spin slightly to check its calibration and then
centre itself.
2 The settings display on the wheel base will then
prompt you to choose which platform you wish
to play on.
3 Use either the le or the right dial on the
steering wheel to select the platform and then
push the dial in until it clicks to make your
selection.
– On PC you must rst download and install the
latest version of the Logitech G HUB soware
at www.logitechG.com/GHUB. Once that is
installed you can begin racing in the title of
your choice. Remember that some titles will
require that you rst congure the wheel in
the control settings of the game before it will
function.
You may also wish to make use of the G923
compatibility mode for some titles which may
be required to either make the wheel work, or to
simplify set up. Details of how to access this can be
found in the section of the manual that covers the
settings display.
Once nished, to power o the wheel, press and
hold the power button for 2 seconds.
ON
1
2
3
logitechG.com/ghub