Logitech SLIM COMBO

Set up and remove the Logitech Slim Combo
Here’s how to set up your Slim combo for the first time:
1. Click the iPad Pro into the holder, starting with the top left corner, then top right.
2. Open the kickstand on the holder, then set your iPad Pro at a comfortable angle. Adjust if
needed.
3. Attach the keyboard, aligning the three connector pins on the keyboard with the three
connector ports on the side of the iPad Pro.
NOTE: Make sure your iOS is up to date (and always stays up to date) — this is
important for Smart Connector, which transfers both power and data between iPad and
the keyboard.