English 11
Quick start guide
* Squeezebox Touch normally relies on a DHCP server to provide an IP address
during setup. If you prefer to use a static IP address, you can do it one of two ways:
Make sure your DHCP server is off, and input a static IP address when Squeezebox
Touch displays the appropriate screen.
Set up and connect your Squeezebox as normal using DHCP. After setup is complete,
go to the Settings screen and change the IP address by entering it manually.
For more information on how to set a static IP address, go to:
www.mysqueezebox.com/support.
Music is not playing
If music is not playing, do the following:1.
Check the cables to your stereo or powered speakers to make sure they are connected 2.
properly.
Check the input selector on your stereo to make sure it matches the inputs you used. 3.
Check the volume on your stereo. 4.
Add exceptions to your firewall software. If you are listening to music from your 5.
computer (using Squeezebox software), make sure there are no firewall warnings on
your screen and make sure your firewall has the proper exceptions. Required exceptions
include: port 3483 UDP, port 3483 TCP, and port 9000 TCP.
As a test, try playing a different song. 6.
If Squeezebox Touch says “Stopped,” check your internet connection.7.
I can’t find my music collection in My Music
If you want to play the music collection that is stored on your computer but your
computer name does not appear in My Music, do the following:
Make sure that you’ve installed Squeezebox software from1. www.mysqueezebox.com.
Make sure Squeezebox software is running.2.
Windows
- Hover your mouse pointer over the software icon in your task bar. If you
don’t see “Squeezebox software Running,” right-click on the icon and select Start
Squeezebox software.
Macintosh
- Click on System Preferences, and then click on Squeezebox
software. If the button displays Start Server, click it. If the button is labeled Stop
Server, the application is already running.
If you are using a third-party firewall such as 3.
Trend Micro, Norton, McAfee
or
OneCare
,
please see our Knowledge Base at
www.mysqueezebox.com/support and search for
articles on your specific firewall. If your firewall is not covered by our Knowledge Base, add
exceptions for three ports as follows: port 3483 UDP, port 3483 TCP, and port 9000 TCP.
For information on how to make this change in your firewall software, search the internet
for “exceptions, ports, <your firewall application name>,” or contact technical support for
your firewall software.
If your network uses multiple routers or Voice over IP (VOIP) or you’re on a corporate 4.
network that has a complex or segmented network configuration, ensure that your
computer and Squeezebox Touch are on the same network segment. This allows
Squeezebox Touch to automatically connect to Squeezebox software on your computer.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
