KNOW YOUR PRODUCT
CONNECT THE SPEAKERS
1. Connect the DC power plug to the back of your right speaker and connect your AC adapter to the electrical outlet
2. Connect to the 3 5 mm audio jack on your source device using the 3 5mm auxiliary input on the back of the right speaker
3. (Optional) Connect your headphones to the headphone jack at the front of the right speaker
4. Turn the speaker on using the power knob
5. To pair your devices with speakers using Bluetooth, press the Bluetooth pairing button for 3 seconds until the LED starts blinking Turn on Bluetooth on your device and select
“Logi Z207” to connect to it The LED will then turn to a steady blue light after pairing
To Next Page
Loading...
