EasyManua.ls Logo

Logosol BIG MILL - Safety Instructions; General Safety Rules; Specific Operational Risks

Default Icon
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
The safety distance for persons other than the
operator is 10 m. A chain that breaks can be
thrown out through the sawdust outlet.
Risk of the chain being thrown out through the
sawdust outlet if it breaks.
Always stand behind the chainsaw during
operation.
Increased throw-out risk! Do not use a ripping
chain when cross cutting.
Never work alone and make sure there are
other persons within earshot who you can
summon if you need help.
SAFETY INSTRUCTIONS
All protective equipment (safety goggles,
protective helmet, hearing protection,
protective footwear, protective gloves,
protective trousers and protective jacket) should
be CE-certied and approved for work with
chainsaws.
If used incorrectly, the equipment can cause
serious injury.
The most important safety instructions are
found on these two pages. Additional safety
instructions will appear in connection to
the sections they concern. All warnings and
instructions must be followed to avoid serious
injury.
Only persons who have read and understood
all of the instructions in this manual, and who
are well-rested, in good physical health, and
have good eyesight are qualied to use the
equipment. Persons who do not meet these
requirements are not qualied operators.
Do not use the equipment under the inuence
of alcohol or drugs.
Only use the equipment in good visibility
conditions.
Minors under 18 years of age are not allowed
to use the equipment. Make sure that children
and animals are not in the vicinity when the
sawmill is being operated.

Related product manuals