3. Jump Clamp Connection Status Display
4. How to use the voltmeter function?
- In normal sta mode, after the product clamps clip are connected to the car batte, it will enter a 10-second
detection countdown;
- If the connection impedance of the product clamps clamp is low, the corresponding product clamps will be
green;
- If the connection impedance of the product clamps clip is high, the corresponding product clamps will be
yellow;
- The product clamps clamp connection status can be adjusted during the 10-second countdown;
In boost sta mode, the product clamps displays green by default.
To Next Page
Loading...
