Lomography LOMO'INSTANT AUTOMAT User Manual

Turn the camera on by turning the Focusing Ring 12 to any focusing distance
besides “Off”, the Film Counter Indication LED 3 will blink slowly. Press the
Shutter Release Button/Self–Portrait Mirror 7 once to eject the dark slide of your
new film pack. Please make sure not to block the Film Ejection Slot 8 whilst the
dark slide is ejecting. The Film Counter Indication LED 3 will light up. The camera
is now ready for shooting.
SHOOTING MODES
The Lomo’Instant Automat has two different shooting modes. You can easily
select your preferred shooting mode by pressing the Shooting Mode Button 2.
Auto Shooting Mode
When the camera is on, it’s set to Auto Shooting Mode by default, you will
get perfectly exposed photos in any situation. The Lomo’Instant Automat
determines aperture and shutter speed automatically (and auto flash output
if flash is on) for perfect exposures. This is the simplest shooting mode to use
at all hours of the day and night!
Bulb Mode
The Lomo’Instant Automat aperture value is f/4.5 by default, so Bulb Mode is
perfect for shooting long exposures, night time shots and light painting pics!
When Bulb Mode is selected, the Lomo’Instant Automat will be set at B
shutter until Auto Shooting Mode is selected again. The shutter will remain
ENGLISH / 11

Lomography LOMO'INSTANT AUTOMAT Specifications

General

Brand	Lomography
Model	LOMO'INSTANT AUTOMAT
Category	Digital Camera
Language	English