LONCIN 900 Mini teller - User Manual

32 pages

Save Page as PDF

To Next Page

Main Page

Questions and Answers

C
Christian GutierrezAug 26, 2025
Why is my LONCIN 900 Mini teller skidding even when the engine runs normally?
- M
  Melissa VaughanAug 26, 2025
  If your LONCIN Tiller is skidding even when the engine runs normally, it could be due to several reasons. A fatigued spring may have failed, requiring replacement. The fork shaft's rotation might be abnormal or failing, causing incomplete return of the fork; try cleaning the junction surface between the locating shaft and pusher to ease the fork shaft's rotation. Additionally, the clutch cable might be adjusted inappropriately, so readjusting it could resolve the issue.
M
misty60Nov 9, 2025
What to do if my LONCIN 900 Mini teller clutch is unable to engage and disengage?
- O
  owenssaraNov 9, 2025
  If your LONCIN Tiller clutch is unable to engage or disengage, several issues could be the cause. The clutch handle might be failing, in which case you should replace or repair it. A damaged clutch cable could also be the culprit, requiring replacement. Check if the clutch fork is not adjusted adequately; readjusting the clutch cable or replacing the clutch fork may solve the problem. Other potential causes include a fork shaft falling off from its welding junction with the arm seat (replace or repair), a broken or bent fork pin (replace the fork pin), a failing friction disk (replace the friction disk), a failing spring (replace the spring), the friction disk set not contacting the bearing face inside the clutch housing (insert one or more washers of appropriate thickness behind the beari...