What causes oil leak from transmission box wall of LONCIN 1WG3.4-85FQ-Z Tiller?
If your LONCIN Tiller has an oil leak from the transmission box wall, it may be due to pinholes hidden in the wall. Repair by welding or applying a base coat.
Why is the clutch on my LONCIN Tiller unable to engage and disengage?
The clutch on your LONCIN Tiller might not be engaging or disengaging due to several reasons. It could be a faulty clutch handle (replace or repair it), a damaged clutch cable (replace the cable), or an inadequately adjusted clutch fork (readjust the clutch cable or replace the clutch fork). Other potential causes include a fork shaft that has fallen off, a broken or bent fork pin (replace the fork pin), a failing friction disk or spring (replace the respective part), the friction disk set not contacting the bearing face (insert washers behind the bearing), or a burnt-out bearing inside the clutch (replace the bearing and add oil to the transmission box if necessary).
What causes oil leaks from connections of the transmission box on a LONCIN Tiller and how to fix it?
Oil leaks from the connections of the transmission box on your LONCIN Tiller can occur if the connecting bolt is loose (retighten the bolt) or if the seal gasket is damaged (replace the seal gasket).
Why does my LONCIN 1WG3.4-85FQ-Z Tiller skid when I grip the clutch handle?
If your LONCIN Tiller is skidding, and the transmission main shaft rotates slowly or not at all when you grip the clutch handle, it could be due to a fatigued spring (replace the spring), abnormal rotation or failure of the fork shaft causing incomplete return of the fork (clean the junction surface between the locating shaft and pusher), or an inappropriately adjusted clutch cable (readjust the clutch cable).
What causes uncompleted gear engagement in a LONCIN 1WG3.4-85FQ-Z Tiller?
Uncompleted gear engagement in your LONCIN Tiller can be caused by several factors: excessive wear of the block (replace the block), a loose driving bevel gear (tighten the round nut), excessive wear of the upper hole of the shift block (replace the shift cam and shift block), a failed positioning spring inside the main shaft (replace the spring), the main shaft bouncing due to a loose gland bolt (retighten the gland bolt), or interference during gear shifting caused by a deformed shift lever (straighten or replace the shift lever).
What causes severe oil leak from transmission countershaft’s hexagon hole in LONCIN 1WG3.4-85FQ-Z?
If there is a severe oil leak from the transmission countershaft’s hexagon hole in your LONCIN Tiller, the countershaft is likely broken and needs to be replaced.
What causes too high noise from gear of LONCIN 1WG3.4-85FQ-Z?
Excessive gear noise in your LONCIN Tiller could be due to significant wear or an incorrect gear repair. Try reinstalling, adjusting, or replacing the gear.
What causes seizure of gear during its rotation in LONCIN 1WG3.4-85FQ-Z?
If the gear seizes during rotation in your LONCIN Tiller, it may be due to incorrect installation. Reinstall it.
How to fix uncompleted gear reversing on LONCIN Tiller?
Uncompleted gear reversing on your LONCIN Tiller can stem from wear of the fork (readjust the reverse cable or replace the fork), failure of the reverse cable (readjust or replace the cable), a loose reverse shaft (tighten the back-end bolt), or a seized fork shaft (clean the junction face of the fork shaft and pusher).
Why is the operating cable on my LONCIN Tiller broken?
The operating cable on your LONCIN Tiller may be broken due to wear caused by long work. Replace the operating cable.
Details guidelines for safe operation, including managing machine movement, vibrations, and post-operation checks.
Outlines safety measures for machine repair, maintenance, and proper storage to prevent damage and ensure longevity.
Explains how to operate the tiller in different speed settings (slow, fast, reverse) and directions.
Lists essential safety precautions and best practices for operating the mini tiller.
Outlines periodic maintenance tasks based on work hours and time intervals.
Diagnoses and solutions for common problems related to the clutch mechanism.
To Next Page
General
