8
5. Operation
（1）. Preparations For Starting
1). Check The General Condition Of The Engine
Look around and underneath the engine for signs of oil or fuel leaks.
Look for signs of damage.
Check that all shields and covers are in place, and all nuts, bolts, and screws are
tightened.
2). Engine Oil Level Check
Check the engine oil level with the engine stopped and in a level
position.
Remove the filler cap/dipstick and wipe it clean.
Insert and remove the dipstick without screwing it into the filler neck. Check the oil level
shown on the dipstick.
If the oil level is low, fill to the edge of the oil filler hole with the recommended oil.
Screw in the dipstick securely.
Service categories: API service categories CD or higher
SAE 15W-40 is recommended for general, all-temperature use. Other viscosities shown in
the chart may be used when the ambient temperature in your area is within the indicated
range.
Dipstick
Upper limit
Lower limit
Oil filler hole
To Next Page
Loading...
Need help?
General
