LONCIN LC1800D-F User Manual

37
Wheel Kit Installation（II）
○
1
. Install the two wheels on the axle shaft;
○
2
. Install the axle assembly on the generator using four bolts(M8×16) and nuts(M8);
③. Install the rubber on the setting rubber using two bolts(M8×25) and nuts(M8);
④. Install the rubber shock absorber on the generator using four bolts(M8×16) and
nuts(M8);
⑤. Install the pipe handle on the setting handle using two bolts(M6×40) and nuts(M6);
⑥. Install the handle comp. on the generator using four bolts(M6×40) and nuts(M6);
inside
longer
aside
shorter
aside
pipe handle
setting handle
handle comp.
rubber
setting rubber
rubber shock
absorber
wheel
axle shaft
axle assembly
M6X40
M6
M8X16
M8
M8X25
M8X16
M8X16

LONCIN LC1800D-F Specifications

General

Brand	LONCIN
Model	LC1800D-F
Category	Portable Generator
Language	English