SPECIFICATIONS
19
8. SPECIFICATIONS
The power rating of the engine indicated in this document is the net power output tested on a production
engine for the engine model and measured in accordance with SAE J1349 at 3,600 rpm (Net Power) and at
2,500 rpm (Max. Net Torque). Mass production engines may vary from this value.
Actual power output for the engine installed in the final machine will vary depending on numerous factors,
including the operating speed of the engine in application, environmental conditions, maintenance, and other
variables.
Model 1P61FA 1P65FA 1P65FE 1P70F 1P68FA 1P70FA
Type Single cylinder, 4-Stroke, Forced Air Cooling, OHV
Rated. power(kW/3600rpm) 2.7 3.0 2.7 3.3 3.4 3.6
Max. torque (N·m/rpm) 7/2500 8.3/2500 7/2500 9/2500 9.5/2500 10.5/2500
Fuel consumption (g/kW·h) ≤395
Idle speed
1800±150 rpm
Bore X Stroke(mm)
61×48 65×48 65×42 70×45 68×51 70×51
Displacement(cc) 140 159 139 173 185 196
Compression Ratio 8 :1
Lubricating mode Splash
Starting Mode Recoil start
Rotation Anti-clockwise(from P.T.O. side)
Valve Clearance
input valve： 0.10±0.02mm, output valve：0.15±0.02mm
Spark plug clearance 0.7~0.8mm
Igniting Mode Transistorized magneto Ignition
Air cleaner Semi-dry, Oil bath, Foam filter
Dimension(L×W×H)(mm)
371×338×275 325×315.5×245 379×358×278 385×358×278
Net weight (kg) 11.7 11.8 8.5 12.5 13.1 12.8
To Next Page
Loading...
Need help?
General
