EasyManua.ls Logo

LONCIN LC6500-J - Starting and Stopping the Engine; Manual Starting; Stopping the Engine

LONCIN LC6500-J
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
STARTING/STOPPING THE ENGINE
- 13 -
6. STARTING THE ENGINE
1) Manual starting
1
. Cut off all loads from the output end.
2
. Turn the fuel cock to the ON position.
3
. Put the choke lever in the OFF position.
Do not shut off the choke if the engine is started when it is warm.
4
. Put the engine switch in the ON position.
5
.Gently pull up the starter grip and pull it out briskly when a resistance is felt.
6
. When the engine has warmed up, put the choke lever in the ON position.
7. STOPPING THE ENGINE
1
. Turn off engine switch.
2
. Turn off fuel cock.
If an emergency stop of the engine is needed, the engine switch
should be put in the OFF position

Related product manuals