CONTROLS
- 5 -
4) Choke Lever
The choke is used to provide an enriched fuel mixture when starting a cold engine. Put
choke lever in the ON position when the engine has warmed up.
5) AC Overcurrent Protector
When there is a problem in the load or a wrong connection, the AC circuit will be
overloaded, and the AC overcurrent protector will automatically disconnect the circuit to
protect it.
When the indicator inside AC overcurrent protector pops up, it means AC overcurrent
protector is in the OFF position. After several minutes, push the protector’s button to let
the protector back to the ON position.
ON
OFF
Choke lever
OFF
ON
To Next Page
Loading...
Need help?
General
