MAINTENANCE
- 17 -
○
4
. Turn the fuel valve to the ON position and check for leaks
4) Spark plug
Recommended spark plugs: F7RTC、F7TC
○
1
. Remove the fuel tank,
○
2
. Remove the spark plug cap,
○
3
. Clean spark plug seat,
○
4
. Use the spark plug socket wrench to remove the spark plug.
.
○
5
Visually check if the spark plug’s insulation is damaged, if so, replace it with a new
one.
○
6
. Measure the plug clearance with a feeler gauge. Correct when necessary by
carefully bending the side electrode. The clearance should be: 0.70-0.80mm
(0.028-0.031 in).
○
7
. Check whether the spark plug washer is in a good condition.
○
8
. Reinstall the spark plug and use the spark plug socket wrench to tighten it and
tightly press the spark plug washer; then reinstall the spark plug cap.
Use the spark plug of the appropriate heat range.
Spark plug socket wrench
Spark plug cap
To Next Page
Loading...
Need help?
General
