3
1
Summary
Precaution in maintenance Standard torque
Main technological parameters for performance Periodic chart for maintenance
Precaution in maintenance
1. Spare parts, lubricant and other auxiliary material adopted should be agreed or
recommended by Loncin. In case selected material failed to meet demands of Loncin
specification and requirement, the motorcycle may damage.
2. Washer, seal parts and split pin need to be replaced when re-intallation after
disassembly is needed.
3. Bolts and nuts should be fastened by the sequence of diagonal cross, and reached
stipulated torque by turning 2～3 times.
4. Flammable cleaning fluid for parts’ washing is not allowed. Spread lubricant on
movable surface of parts before installation.
5. Inspect and confirm correct assembly after installation, check by means of turning,
moving and operation.
To Next Page
Loading...
