LONCIN YF300 - Page 47

47
Check transmission system
Check flexibility of turning or axial moving
of main or counter shaft and their each
gear.
Check abrasion or damage on each gear of
main and counter shaft.
Check width B of fork groove
Standard： 5.0～5.18
Limit：5.33
Check thickness A of fork and its plate
Standard： 4.93～5.0
Limit：4.83
Check diameter A of fork pin
Standard： 5.9～5.95
Limit：5.8
Check groove width B for fork on gearshift
drum
Standard： 6.05～6.15
Limit：6.2