LONGER LASER B1 - Page 41

www.longer3d.com info@longer3d.com
38
f) Engrave from SD files
Click Graving on the home UI, the APP will read the engraving file in
the SD card, select the engraving file, click Frame to determine the
engraving range, and click Confirm to start engraving.
In the Graving View UI, it can check the engraving progress, adjust
speed and laser power, pause or cancel the engraving process.
Move to the positive
direction of the Y axis
Move to the positive
direction of the X axis
Move to the negative
direction of the Y axis
Move to the negative
direction of the X axis
Set move speed
Choose the distance
to move per step
Turn on the laser
Set user zero point
Home to user
zero point