Need help?Do you have a question about the LONGER LASER B1 and is the answer not in the manual?
Details laser beam hazards, including eye/skin damage, and classifies laser classes by risk.
Emphasizes wearing PPE, especially safety glasses, and lists critical "DO NOT" rules for laser operation.
Recommends ventilation, fire safety measures, and lists hazardous materials to avoid.
Lists specific materials like PVC, Lexan, ABS, HDPE that should not be engraved or cut due to hazards.
Provides guidelines for using the correct 24V DC power adapter and explains power-on indicators.
Details technical specs like working area, power, dimensions, and applicable materials for both models.
Step-by-step guide on connecting adapter, power cord, and computer to turn on the machine.
Instructions for downloading, installing, and connecting LaserGRBL, including basic operation steps.
Guide for installing and configuring LightBurn software, including interface, settings, and basic operation.
Instructions on how to update the LASER B1 firmware using the MKS Laser Tool.
Guide to controlling the LASER B1 via the MKSLaser mobile APP, including WiFi connection and usage.
Instructions for controlling the engraver via a web browser using its IP address.
Details on the installation and operation of the air valve for air assist.
Information on finding recommended material profiles for engraving and cutting parameters.
Solutions for issues like engraved patterns appearing with vibration or not closing properly.
Outlines the one-year limited manufacturer warranty, services, and how to handle warranty cases.
Steps and precautions for cleaning the laser module, hood, and lens to maintain performance.
Explains alarm 2 errors related to exceeding machine travel and how to home the engraver.
Addresses potential upload errors when using the APP for engraving, suggesting SD card insertion.
To Next Page
General
