Need help?Do you have a question about the LONGER RAY5 20W and is the answer not in the manual?
General| Laser Power | 20W |
|---|---|
| Laser Output Power | 20W |
| Laser Type | Diode Laser |
| Connectivity | USB, Wi-Fi |
| Software Compatibility | LaserGRBL, LightBurn |
| Engraving Accuracy | 0.1 mm |
| Focusing Method | Manual |
| Engraving Speed | 10000mm/min |
| Cooling System | Air Cooling |
| Focus Adjustment | Manual |
| Supported Materials | Wood, Acrylic, Leather, Fabric, Paper |
| Laser Wavelength | 455nm |
| Operating System | Windows, Mac |
| Input Voltage | AC 100-240V |
| Spot Size | 0.08 mm |
| Engraving Area | 400x400mm |
| Power Supply | 24V 5A |
Details technical specifications of the RAY5 laser engraver, including dimensions and power.
Identifies and labels the various parts of the RAY5 laser engraver.
Lists all items included in the RAY5 laser engraver package.
Provides instructions and guidance for assembling the RAY5 laser engraver.
Step-by-step guide on how to properly focus the laser module for engraving.
Instructions for powering on the RAY5 laser engraver correctly.
Details the functions and navigation of the RAY5's touch screen interface.
Guide to connecting and controlling the RAY5 via Wi-Fi.
Instructions for setting up and using the LaserGRBL software for engraving.
Guide to installing and operating the LightBurn software for engraving and cutting.
Steps to update the firmware of the RAY5 laser engraver.
Instructions for controlling the RAY5 using the MKSLaser mobile application.
To Next Page
