1 Warnings
• Do not turn the machine upside-down.
• After use, empty the solution tank and spray water 1-2 minutes to clear
the solution pipeline. This is especially important for corrosive chemicals.
• When cleaning the machine, don’t splash water onto the motor and power
switch.
• Do not operate if the power cord or power switch insulation is damaged.
• Strongly corrosive chemicals may damage the machine.
• Do not allow corrosive gas to enter the machine through the air intake,
otherwise motor damage can occur.
• Be careful where you point the nozzle while you adjust the solution output.
2
To Next Page
Loading...