Longray Basic ULV Fogger - Care and Maintenance; Cleaning Procedure; Long-term Storage; Wear and Tear

4 Care and maintenance
4.1 Cleaning
1. Empty any chemical from the tank.
2. Clean the tank: add water, tighten the lid and shake.
3. Clean the solution pipeline: start the machine and spray 1-2 minutes.
4. Turn off the unit and empty the rinse water from the tank.
4.2 Long-term Storage
1. Follow the steps in 4.1 Cleaning to clean the machine.
2. After emptying the tank of rinse water, dry the tank and pipeline by running
the machine for 1-2 minutes with an empty tank.
3. Store the unit in a dry, well-ventilated location.
4. Leave the solution lid open.
4.3 Wear and tear
Moving parts should be lubricated every 3-6 months to prevent corrosion and
oxidation. If any hoses, gaskets, and O-rings become cracked, brittle, or stiff,
replace immediately.
5