Longrun LRF-3000S - Page 34

LRF-3000S Ultrasonic Transit-time Flow meter
- 33 -
The K factor is used to modify the measurement
results. The user can enter a numerical value (other
than "1") according to the actual calibration results.
M27
Correction
K-Array
Sectional Correction
ON: Open the Sectional Correction Function;
OFF: Close the Sectional Correction Function
Delay correction
Engineer menu, suggest customer use the factory
setting.
TPC
Transducers power control
Engineer menu, suggest customer use the factory
setting.
0. Auto
1. Low
2. High
M28
SQA
M26
K Factor
*R
Value
1.000
M27
Correction
*R
Option
0.ON
KArray
Delay
TPC
Value
************
Value
0.0
us
TPC
M27
Correction
*R
KArray
Delay
KArray
Delay
TPC
Option
0.Auto
M27
Correction
*R