a. No Signal
b. *E
c. Reverse
d. Alarm1
e. Alarm2
f. Ration
g. POS Total
h. NEG Total
i. NET Total
j. Not Using
M35
Alarm Setting
Enter the Lower \ alarm value, any of the measured
flow, which is lower than the low value, will
activate the alarm in the OCT hardware or relay
output signal.
Enter the Upper alarm value, any of the measured
flow, which is higher than the high value, will
activate the alarm in the OCT hardware or relay
output signal.
M36
Ration
To Next Page
Loading...