method to set the IP address of the server. You can automatically
get IP address by using DHCP or manually assign an IP address to
the server.
Figure 3 TCP/IP Setting
5. Set up wireless configuration:
- Set SSID, Channel, and Security according to the table below
Infrastructure Mode
SSID Must match the Access Point.
Channel Access Point sets the Channel used.
Wireless stations automatically locate
the correct channel.
Security
Settings
Must match the Access Point.
⑨
⑨⑨
⑨
.
Install the Driver of the USB Device
Some USB devices, like printers or MFPs (multifunction printers),
require to install vendor-supplied driver (usually on CDROM). For
those USB devices that do not need to install driver, please skip to next
step.
To Next Page
Loading...