switch handle counterclockwise to “OFF” position.
To turn on battery negative pole switch:
Before starting the loader, it is necessary to turn
the negative-pole switch handle clockwise to
“ON” position.
Do not turn off the battery negative-pole switch while the engine is in operation,
otherwise the electrical system of loader may be damaged.
3.3 STARTER SWITCH
The starter switch (“electrical lock”) is arranged
on the panel of control box in the right of Cab. The
starter switch can be turned clockwise to three
positions.
1.
OFF-- When the starter switch key stays at this
position, the power supply to loader will be cut off.
The loader is off, i.e. automatic stop.
Only at this position can the starter switch key
be inserted or taken out!
2.
ON--clockwise turn the starter switch key, the
first position is “ON”. Keep the key at this position,
To Next Page