Lonove MD751 - Specifications; Terms and Conditions

SPECIFICATIONS
Capacity
Approx 750ml per day at 30℃ (86℉), 80% RH
Cooling element
Thermo-electric Peltier module
Fan
90mm x 90mm DC Brushless motor
Power adapter
15V DC 4Amp
Power consumption
60W
Water tank capacity
2000ml/68 oz
Water level detector
When the water tank is full, the yellow indicator
light is on and the green indicator light is flashing
Drying feature
Warm air outlet for drying purposes
Product dimension
20cm(L)x20cm(W)x32.5cm(H);7.87in*7.87in*12.8in
Working environment
Temperature
：
15
℃
-40
℃
(59
℉
-104
℉
) Humidity
＞
45%RH
TERMS & CONDITIONS
How to Get a Better Result of Dehumidification
1. Before using the dehumidifier, please check whether the environmental humidity and
temperature have met basic requirements.
 Operating temperature: 59℉-104℉(15℃-40℃ )
 Operating humidity: >45%RH
2. Close the doors and windows when you run this room dehumidifier
3. Keep the front air inlet and the back outlet of this electric dehumidifier free from blocking
4. Best for spaces smaller than 450 sq ft, such as living room, bathroom, bedrooms, kitchen,
garage, basement, office, RV, etc.
Imporatant Notes:
The effect of this dehumidifier is related to the temperature, the humidity and the size of the
room. The more humid, the better effect.The smaller the room, the better effect.
 When you run the dehumidifier in winter, please make sure that the room has enough
warmth, which can help the dehumidifier work better, avoid frosting affecting the
dehumidification effect.

If the air temperature is
＜
59℉ (15 ℃), the effect of dehumidification is not
obvious, and it will not work
＜
41°F(5℃).
 If the humidity is
＜
60%RH, the dehumidifier usually does not remove 25oz
(750ml) a day.
Since the principle of our product is semiconductor dehumidification, so it needs about 2-3
days to see a significant dehumidification effect.