Operations
03
1. Please charge the camera before use.
2. Please use the USB cable in the box to charge the camera.
3. While charging, the charging light (red light) will remain on, and it
1. Open the cover of the TF card slot.
2. Insert a Class 10 or above TF card. Max. storage is 128G.
Please follow the right direction to insert the TF card and cover the card slot.
3. Don’t remove the TF card while recording.
4. Please format the TF card when using for the first time, please use the APP
to format it or press 5 times to use the machine to format it.
PS.During use, there is a battery low-power alarm (quick flash of green
light). If it’s out of battery, the camera will automatically turn-off.
PS.The machine might not detect a new 64G or 128G TF card when using for the
first time (you will see the 3 lights flashing quickly), please press 5 times to format
the card first.
1. By APP: You can connect the WIFI and go the APP
setting page to format the TF card.
2. By pressing the key button: stop the recording first
(you will see the white light remains on), then press 5
times the key button and it will vibrate 5 times to format
the card.
Charge the Battery
will automatically shut off at full charge.
Insert the TF card
Format the TF card
To Next Page
Loading...