Lorex LNR400 SERIES Quick Mobile Guide

Find your Device ID
Record your information below:
DEVICE ID:
Quick
Reference
Default access information:
• Default user name: admin
• Default password: 000000
Default system ports:
• HTTP Port: 80
• Client Port: 35000
Information in this document is subject to change without notice. As our products are subject
to continuous improvement, Lorex Corporation and our subsidiaries reserve the right to
modify product design, specifications and prices, without notice and without incurring any
obligation. E&OE © 2015 LOREX. All rights reserved.
lorex.ca/LNR400
It’s all on the Web
Need Help?
Visit www.lorextechnology.com/support
LNR400_SERIES_QNG_EN_R2
If you have forgotten your
password, contact
Lorex technical support.
2
b
• PC Users: Download and install the Client
Software for PC from lorex.ca/LNR400.
• Mac Users: Download and install the Client
Software for Mac from lorex.ca/LNR400. Double
click to extract the software. Then, drag the
software to Applications.
a
Once installation is finished, double-click the FLIR
Cloud Client™ icon ( ) on the desktop or
Applications list.
e
1
2
3
4
5
Enter the following information:
3
Connecting on PC or Mac
Quick PC/MAC Guide
Congratulations! You can now connect over the Internet to view
and playback video on your computer.
15 Minutes
The Device ID is printed on a label on the top panel of the NVR.
See the label on top of
your NVR for your
Device ID.
NOTE: PC/Mac setup is
not required to connect on
a smartphone or tablet.
See reverse for
smartphone/tablet setup.
Scan the QR code or visit the address below to access
the latest software and instruction manuals.
c
Log into the Client Software using the Client Software
user name (default: admin) and password (default:
admin) and then click Login.
d
Device Name: Choose a name for your system of your choice.
Device ID: Manually enter the Device ID printed on the label.
Client Port: Enter the Client Port (default: 35000).
User Name: Enter the NVR’s User Name
(default: admin).
Password: Enter the NVR’s Password
(default: 000000).
f
You will be prompted to change the NVR
password. Click OK.
g
Enter a new 6 character password and tap
OK. This password will be used to connect to
your system from now on.
h
Click then .
i
Click and drag Default Group to the display
window to open your cameras in live view.
User Name: admin
Password: admin
Click Add Device
1
2
3
4
5
Click Add
EXAMPLE
Download and install the client software.
Device ID: xxxxxxxxxxx

Lorex LNR400 SERIES Specifications

General

Brand	Lorex
Model	LNR400 SERIES
Category	DVR
Language	English