c
Before You Start:
• Make sure you
have a router
and high-speed
Internet access
(not included).
LHA2000 / LHA4000 SERIES
Congratulations! You can now view video from your cameras on your PC or Mac.
• Connect your DVR
to your router
using an Ethernet
cable (see the
Quick Connection
Guide for details).
• Upgrade your DVR
firmware and client
software or mobile
app to the latest
versions.
LHA2000_LHA4000_LS_QNG_EN_R2
PC / Mac Setup
Find Your Device ID
Record your information below:
DEVICE ID:
2
The Device ID is printed on a label on the top panel of the DVR.
Device ID: xxxxxxxxxxx
1
2
• Please note that an upload
speed of 2 Mbps is required
for remote video streaming
(3 Mbps and above
recommended). Up to 3
devices may connect to the
system at the same time.
HD Digital Video Surveillance Recorder
LHA2000 / LHA4000 Series
Quick Networking Guide
a
• PC Users: Download and install Lorex Client 13 for
PC from lorex.com.
Download and install the client software:
• Mac Users: Download and install Lorex Client
13 for Mac from lorex.com. Double-click to
extract the software, then drag the software to
Applications.
b
c
Click Login.
d
Double-click the Lorex Client 13 icon ( )
on the desktop or Applications list.
Enter the
DVR’s Device
ID recorded in
section 1
Enter the following information:
Enter the DVR’s
Client Port
(default: 9000)
Enter the DVR’s
user name
(default: admin)
Enter the secure
password you
created for the
DVR
e
All connected cameras are shown on
screen in the Lorex Client 13 home
screen.
NOTE: For full instructions on how to use the
Lorex Client 13 software for PC and Mac, see
your DVR’s instruction manual at lorex.com.
To Next Page
Need help?
General